A hoodie designed around circuit teams, race series organisers and motorsport sponsors and the way the garment is actually worn team kit is seen on grid walks and in sponsor photography as much as in the car, so the finish has to hold up close up.
Shell fabric: confirmed with you before quoting — tell us the hand-feel, weight and stretch you are after, or ask for the fabrics we hold for this garment type. Construction: an attached hood with drawcord, a front pocket or kangaroo pocket, and ribbed cuffs and hem. The hood is cut as part of the garment rather than added afterwards, so it sits flat when worn down. Nothing is cut until the specification sheet is agreed: weight, finish and trims are all on it, together with the size chart.
Decoration: sublimation, screen print, transfer or embroidery. Decoration method is matched to the file you send, and we tell you at quoting if the artwork needs adjusting.
Colour: any Pantone reference you supply; we cut the full size run from one lot, because a shade difference between sizes is the complaint you cannot fix afterwards.
Size range: S – XXL as standard on this product; mixed sizes are accepted inside a single order so you can order to your actual squad or staff breakdown.
Branding positions: left chest, right chest, centre back, sleeves, collar and hem, each priced separately.
Labels and packing: packing is your choice — single poly-bag with size sticker, or bulk-packed by size.
Ordered by circuit teams, race series organisers and motorsport sponsors. Team kit is seen on grid walks and in sponsor photography as much as in the car, so the finish has to hold up close up. This product sits in our Custom Uniform and Workwear range. Because these are worn together rather than individually, the size breakdown matters as much as the total quantity — send the numbers per size and we cut to them.
| Item | Detail |
| Reference price | US $13-15 / Piece |
| Minimum order quantity | Confirmed per order - ask us with your size breakdown |
| Pre-production sample | Produced and approved before bulk; sample cost and lead time confirmed per order |
| Bulk lead time | Confirmed per order, counted from sample approval |
| Payment terms | Confirmed per order |
| Shipping | By air, sea or courier, quoted against your delivery address |
Because this garment carries a name that is not ours, the failure points that matter are the ones that appear after a handful of washes rather than the ones visible on a flat lay.
Yes — a pre-production sample is produced and signed off before bulk starts. Approving the sample is what locks the fabric, colour and decoration method.
Yes, and we would rather you did. A trial run proves the fit, the colour and the decoration before you commit to a larger programme.
It varies by garment and by decoration method, so we quote it against the specific item rather than giving one figure for everything. Send the product you are interested in and we will confirm it.
Talk to us about this hoodie. Send whatever you have — a sketch, a reference garment or a finished design — plus the sizes and the date, and we will take it from there.
Related: Custom Uniform and Workwear · Custom Racing Uniform · Custom Racing Polo Shirt · Custom Racing Polo Shirt · Custom Racing T-Shirt · Custom Zipper Jacket For Team Events
A hoodie designed around circuit teams, race series organisers and motorsport sponsors and the way the garment is actually worn team kit is seen on grid walks and in sponsor photography as much as in the car, so the finish has to hold up close up.
Shell fabric: confirmed with you before quoting — tell us the hand-feel, weight and stretch you are after, or ask for the fabrics we hold for this garment type. Construction: an attached hood with drawcord, a front pocket or kangaroo pocket, and ribbed cuffs and hem. The hood is cut as part of the garment rather than added afterwards, so it sits flat when worn down. Nothing is cut until the specification sheet is agreed: weight, finish and trims are all on it, together with the size chart.
Ordered by circuit teams, race series organisers and motorsport sponsors. Team kit is seen on grid walks and in sponsor photography as much as in the car, so the finish has to hold up close up. This product sits in our Custom Uniform and Workwear range. Because these are worn together rather than individually, the size breakdown matters as much as the total quantity — send the numbers per size and we cut to them.
| Item | Detail |
| Reference price | US $13-15 / Piece |
| Minimum order quantity | Confirmed per order - ask us with your size breakdown |
| Pre-production sample | Produced and approved before bulk; sample cost and lead time confirmed per order |
| Bulk lead time | Confirmed per order, counted from sample approval |
| Payment terms | Confirmed per order |
| Shipping | By air, sea or courier, quoted against your delivery address |
Because this garment carries a name that is not ours, the failure points that matter are the ones that appear after a handful of washes rather than the ones visible on a flat lay.
Yes — a pre-production sample is produced and signed off before bulk starts. Approving the sample is what locks the fabric, colour and decoration method.
Yes, and we would rather you did. A trial run proves the fit, the colour and the decoration before you commit to a larger programme.
It varies by garment and by decoration method, so we quote it against the specific item rather than giving one figure for everything. Send the product you are interested in and we will confirm it.
Talk to us about this hoodie. Send whatever you have — a sketch, a reference garment or a finished design — plus the sizes and the date, and we will take it from there.
Related: Custom Uniform and Workwear · Custom Racing Uniform · Custom Racing Polo Shirt · Custom Racing Polo Shirt · Custom Racing T-Shirt · Custom Zipper Jacket For Team Events
Product: | Custom Red Bull Events Uniform Sublimation Embroidery Unisex Sport Hoodies Manufacture |
Fabric: | 100% polyester, 150/160/180/220/280GSM |
Feature: | Breathable, Strong, Cool, Quick Dry,wicking |
Printing: | Embroidery,Full Digital Sublimation Printing, Never fade |
Advantages: | Small MOQ, embroidered logo available |
Stitching: | High stand stitching, lock stitch |
Color: | No limited |
Size: | Customized size for Kids, Youth & Adults |
Packing: | Poly bag for each jersey |
Delivery time: | about 5-7 days after paid |
POINT OF MEASUREMENT | Grading | XS | S | M | L | XL | 2XL | 3XL | |
A | HALF CHEST 3CM BELOW UNDERARM | 2.5 | 49.0 | 51.5 | 54.5 | 57 | 59.5 | 62.5 | 65.5 |
B | SHOULDER BREADTH | 1.5 | 47.0 | 48.5 | 50 | 51.5 | 53 | 54.5 | 56 |
C | NECK WIDTH | 0.5 | 21.5 | 22 | 22.5 | 23 | 23.5 | 24 | 24.5 |
D | FRONT NECK DROP FROM SIDE NECK | 0.5 | 9.5 | 10 | 10.5 | 11 | 11.5 | 12 | 12.5 |
E | HOOD WIDTH | 0.25 | 27 | 27.25 | 27.5 | 28 | 28.5 | 29 | 29.25 |
F | HOOD OPENING | 0 | 35 | 36 | 36 | 37 | 37.5 | 38 | 38.5 |
G | HALF HEM BASQUE | 2.5 | 47.0 | 49.5 | 52 | 54.5 | 57 | 59.5 | 62 |
H | HEM BASQUE WIDTH | 0.0 | 7.0 | 7 | 7.0 | 7.0 | 7.0 | 7.0 | 7.0 |
I | SLEEVE LENGTH FROM CB | 1.35 | 86.30 | 87.65 | 89.00 | 90.35 | 91.70 | 93.05 | 94.40 |
J | HALF SLEEVE CUFF OPENING RELAXED | 0.25 | 9.50 | 9.75 | 10.00 | 10.25 | 10.50 | 10.75 | 11.00 |
K | SLEEVE CUFF WIDTH | 0.0 | 5.0 | 5 | 5 | 5 | 5 | 5 | 5 |
L | BACK LENGTH FROM SIDE NECK EDGE | 1.5/ 1.0 | 69.0 | 70 | 71.5 | 73 | 74.5 | 76 | 77.5 |