+86-137-7700-4477  |    evan@chinayinshan.com

Custom Sportswear Expert in China

You are here: Product Detail » News Category » Custom Sportswear Design and Manufacture Introduction » Customized Zipper Sports Jacket with Sports Logo Design Printing and Embroidery

Customized Zipper Sports Jacket with Sports Logo Design Printing and Embroidery

A tracksuit top is judged twice: once when the club sees the sample, and again eighteen months later when the zip has been pulled a few hundred times. The first judgement is about the logo. The second is about everything that is not the logo — the zip, the collar, the cuffs, and whether the fabric has started to pill under the arms.

This page covers our customised zipper sports jackets with sports logo design, printing and embroidery: how a made-to-order jacket differs from a stock track top, what the zip and collar choices mean in use, how print and embroidery are combined on a panel garment, and how club, corporate and event orders are structured.

Quick answer: A custom zipper sports jacket is a full-zip jacket made to order in the client's own colourways, with a printed logo or graphic and usually an embroidered chest logo. Unlike a stock track top, the fabric, the weight, the zip, the collar and the print placement are all specified by the buyer, so the jacket can match an existing kit. The two decisions that affect how long the jacket lasts are the zip specification and the fabric weight; the decision that affects how it looks on delivery is the logo position, which should be standardised before the first run so repeat orders line up.

For a lighter layer without sleeves, the closer match is our zipper sleeveless softshell vest. If a bonded softshell shell is what the brief calls for, compare the softshell sports jacket for clubs.

Made to order versus a stock track top

A stock track top is bought in bulk and decorated afterwards. A made-to-order jacket is built from the specification outwards. The difference shows up in three places that buyers notice only after delivery.

Element Stock track top, decorated Made-to-order jacket
Colour Whatever the supplier carries Matched to the club's existing kit
Fabric weight Fixed by the stock item Chosen for the season and the use
Zip Whatever was fitted at the factory Specified and replaceable in repeat orders
Logo position Placed to avoid an existing seam Set once and repeated exactly
Trim colour Limited to stock options Specified with the garment
Panel layout Set by the base garment Designed to suit the graphic

The practical advantage is repeatability. A club that has settled its colour reference, logo size and logo position can order the same jacket again next season and receive a garment that matches the previous squad.

custom zipper sports jacket with a printed logo on the chest

A full-zip sports jacket is the piece a team actually wears off the pitch, so the zip quality and the collar shape matter as much as the print.

The zip and the collar decide the working life

Two components fail on a track jacket before the fabric does, and both are easy to specify in advance.

  • The zip. Ask what type is fitted and whether it is replaceable. A plastic-tooth zip is lighter; a metal zip feels more substantial and suits presentation wear. Either is fine, as long as the slider is sized to the tape so it does not skip.

  • The collar. A stand collar protects the neck and holds a logo well. A hood adds bulk and needs its own drawcord specification. The choice should follow the use, not the photograph.

  • Cuffs and hem. Rib trims stretch over time. Heavier rib holds longer, and a matching trim colour keeps the jacket looking deliberate after the first wash.

  • Pockets. Zip pockets for anything the wearer will run in; plain pockets for presentation wear. Ask which is fitted before assuming.

Print and embroidery on a panel jacket

A zipper jacket offers more decoration area than a tee, but the garment is assembled from panels, so placement has to respect the seams. A graphic that crosses a shoulder seam or a side seam will break at that line, and the arms of the print will no longer meet.

Three rules cover most briefs:

  • Keep each element inside one panel. Chest logos, sleeve marks and back graphics should each sit on a single piece of fabric.

  • Match the method to the surface. Bonded softshell panels take print well and embroidery with the right backing. Woven or brushed surfaces need a trial before a full run.

  • Standardise size and position. Record the logo width in millimetres and its distance from the placket. A verbal description will drift between runs.

The common structure is an embroidered logo on the left chest, a printed graphic or club name across the back, and a small printed mark on the sleeve or the nape. That keeps embroidery where detail is read up close and print where the graphic needs area.

embroidered chest logo and printed back panel on a custom track jacket

The usual structure is an embroidered logo on the chest and a printed graphic across the back, which keeps each method where it performs best.

Who orders custom zipper sports jackets

  • Sports clubs specifying a warm-up and travel jacket that matches the kit.

  • Schools and universities ordering staff, society or team jackets in a range of sizes from one run.

  • Companies using a branded jacket as corporate wear for outdoor events or site staff.

  • Event organisers needing a jacket for marshals, crew or volunteers that reads clearly in poor light.

  • Gyms and studios wanting a staff layer that carries the brand and survives daily use.

  • Brands and distributors adding a made-to-order outer layer to a range that already has tees and polos.

Ordering: what to confirm before production

Item Why it matters What to send
Quantity per size Sizes are cut in groups, so an uneven count raises the piece cost A table of size codes with a count against each
Colourway Each colourway carries its own minimum The reference, plus a swatch approval where the colour is critical
Fabric and weight Sets the season the jacket suits and how it prints The end use and the climate, so the weight can be recommended
Zip and trim Decides the working life of the garment Whether the jacket is for training, travel or presentation wear
Decoration Print and embroidery carry separate setup and minimums Vector artwork with printed and embroidered parts marked separately
Delivery date Determines whether a sample round fits The date the jackets must be in hand

team zipper sports jackets supplied in club colours with matching print

Club orders are usually supplied with the same logo size and position across every size, so the range looks consistent when the squad stands together.

Frequently asked questions

Can the jacket be made in our club colours exactly? Yes, subject to a swatch approval. Approve a physical swatch rather than a screen colour, and record the fabric reference so the next order matches.

Can we have a printed back and an embroidered chest logo? Yes, and it is the usual combination. Keep the graphic inside the back panel so it does not break across a seam.

Are the jackets made in men's and women's fits? Yes, and the difference is not only sizing. Ask for both charts by measurement, because a scaled men's chart does not fit a women's brief.

Can we add individual names? Yes. Send one row per person with the exact spelling and size, and ask for the list to be confirmed back before production.

Is a pre-production sample available? It is the cheapest way to remove risk on a first order, particularly where the colour is being matched to an existing kit. Allow for the sample round in the schedule.

How should the jacket be washed? At a moderate temperature and inside out, with the zip fastened, and without high-heat drying or ironing directly over printed or embroidered areas.

Next step

Send the quantity by size, the colourways, the fabric weight or the intended season, the zip and trim preferences if you have them, the artwork with printed and embroidered elements marked separately, and the date the jackets must be delivered. You can send a custom requirement directly, compare this jacket with our polo range if the brief also needs kit tops, or browse the wider teamwear range. Request a quote.

If you would like to have a question then get in touch today, we are ready to assist 24/7.
We welcome your cooperation and we will develop with you.

 Factory-direct Connectivity Solutions.
 High quality, Competitive Price.
 Custom-tailored solutions.
 Problem-solving approach.
 
Contact us

ABOUT US

Ningbo Yinshan Garments Factory was established in 1986, specializing in designing and manufacturing custom sportswear, sports teamwear, customised workwear and uniform, promo events clothing, fitness and activewear. Yinshan Sportswear is the official teamwear supplier for Formula One, Formula E, MotoGP, Nascar, Boston Marathon, Queensland Basketball Associations, etc. 
 
Yinshan Sportswear, operating 4 design studios and 5 factories, including 25 production lines, is the leading custom sportswear designing and manufacturing company for Custom Sports T Shirt, Custom Sports Polo shirt, Custom Sports Shirt, Custom Sports Hood, Custom Sports Vest, Custom Sports Pants and Shorts, etc. Welcome your enquire.
 
Leave a Message
Contact us

CONTACT US

 Room 1105-1107, Block G, 959 Creative Park, Chengxin Road 959, Ningbo, China
 +86- 574-2771-8821
+86-137-7700-4477
 +86-574-2771-8820
 evan@chinayinshan.com
 
Copyright © 2026 Ningbo Yinshan Garments Factory  |  Privacy Policy  |  Terms of Service